Removing And Installing A Fan - Siemens SIMATIC PC BI10 Technical Description

1.4.11

Removing and Installing a Fan

Figure 1-30 Removing and Installing the Fan
Proceed in reverse order to install the fan.
Note
You must install a fan of the same type.
SIMATIC PC BI10/FI10/FI15, Technical Description
C79000-G7076-C773-03
Open the system unit as described in Section 1.4.1.
In the case of the BI10 and FI10, remove the floppy disk drive first as
described in Sections 1.4.6 and 1.4.7 respectively.
The fan is fixed to the system housing with two plastic rivets. Remove the
rivets by pressing the thorns out of the body of the rivet from behind.
Disconnect the connector for the fan cable at the power supply and lift the
fan out.
System Unit
1-33