Cpas Phone Activity Status; Cpbf Find Phone Book Entries - Nokia 8850 Command List

+CPAS Phone Activity Status

+CPBF Find Phone Book Entries

AT Command Set for Nokia 8850
Returns the general status of ME. Supported <pas> values are product specific. If TA
and ME are disconnected from each other <pas>=1 (ME unavailable) shall be
reported. If TA and ME are in one physical entity, test command shall still report that
<pas>=1 is available although it could not be reported ever. (GSM 07.07 section 8.1.)
Syntax:
AT+CPAS
AT+CPAS=?
Parameters:
<pas>:
0
1
2
3
4
5
If searched text is not found from entries in current memory, response is empty.
<nlength> and <tlength> parameters of test command may be figured out from ME
model or (in case of SIM) left empty. (GSM 07.07 section 8.13.)
Syntax:
AT+CPBF=<findtext>
AT+CPBF=?
Parameters:
<index1>, <index2>: integer type values in the range of location numbers of
phonebook memory
<number>: string type phone number of format <type>
<type>: type of address octet in integer format (GSM 04.08, subclause 10.5.4.7)
<findtext>, <text>: string type field of maximum length <tlength>; character set as
specified by command Select TE Character Set +CSCS
<nlength>: integer type value indicating the maximum length of field <number>
<tlength>: integer type value indicating the maximum length of field <text>
Copyright © 2000. Nokia Mobile Phones. All rights reserved.
Response is +CPAS:<pas>.
Show supported values.
Response is +CPAS: (list of supported
<pas>'s)
ready (ME allows commands from TA/TE)
unavailable (ME does not allow
commands from TA/TE)
unknown (ME is not guaranteed to
respond to instructions)
ringing (ME is ready for commands from
TA/TE, but the ringer is active)
call in progress (ME is ready for
commands from TA/TE, but a call is in
progress)
asleep (ME is unable to process
commands from TA/TE because it is in a
low functionality state). Also all other
values below 128 are reserved.
Response is [+CPBF:
<index1>,<number>,<type>,<text>[[...]
+CPBF:
<index2>,<number>,<type>,<text>]]
Show supported values.
Response is +CPBF:
[<nlength>],[<tlength>]
30