Ccfc Call Forwarding Number And Conditions - Nokia 8850 Command List

+CCFC Call Forwarding Number and Conditions

AT Command Set for Nokia 8850
<name>:
0
1
2
3
4
5
6
7
also all other values below 128 are
reserved
<ce>:
0
1
2
3
Controls call forwarding supplementary services. <reason> values 4 and 5 are only
applicable for <mode>=0. When status request response from network indicates that
SS is active for specific data bearer services (e.g. 'circuit async'), AT interface shall
only indicate 'data' (<class>=2) ('not active' case is displayed only when SS is not
active to any service; i.e. +CCFC: 0,7). (GSM 07.07 section 7.10.)
Syntax:
AT+CCFC=<reason>,
<mode>,<number>,
<type>,<class>,
<subaddr>,
<satype>, <time>
AT+CCFC=?
Parameters:
<reason>:
0
1
2
3
4
5
<mode>:
0
1
2
3
4
<number>: string type phone number of forwarding address in format specified by
<type>
<type>: type of address octet in integer format (GSM 04.08, subclause 10.5.4.7);
default 145 when dialling string includes international access code character "+",
otherwise 129
<subaddr>: string type subaddress of format specified by <satype>
Copyright © 2000. Nokia Mobile Phones. All rights reserved.
data circuit asynchronous (UDI or 3.1 kHz
modem)
data circuit synchronous (UDI or 3.1 kHz
modem)
PAD Access (asynchronous) (UDI)
Packet Access (synchronous) (UDI)
data circuit asynchronous (RDI)
data circuit synchronous (RDI)
PAD Access (asynchronous) (RDI)
Packet Access (synchronous) (RDI)
transparent
non-transparent
both, transparent preferred
both, non-transparent preferred
When <mode>=2 the response is +CCFC:
<status>,<class1>[,<number>,<type>
[,<subaddr>,<satype>[,<time>]]]
[<CR><LF>+CCFC:
<status>,<class2>[,<number>
,<type>[,<subaddr>,<satype>[,<time>]]]
[...]].
The default option is [,,, 129/145,7
,,128,20]
Show supported values.
unconditional
mobile busy
no reply
not reachable
all call forwarding (GSM 02.30)
all conditional call forwarding (GSM 02.30)
disable
enable
query status
registration
erasure
12