Cpbw Write Phone Book Entry; Cpin Enter Pin; Cpms Preferred Message Storage - Nokia 8850 Command List

At command set
Hide thumbs Also See for 8850:
Table of Contents

Advertisement

+CPBW Write Phone Book Entry

+CPIN Enter PIN

+CPMS Preferred Message Storage

AT Command Set for Nokia 8850
<index> must always be given in NMP products. <nlength> and <tlength>
parameters of test command may be figured out from ME model or (in case of SIM)
left empty. (07.07 section 8.14.)
Syntax:
AT+CPBW=<index>,
<number>, <type>, <text>
AT+CPBW=?
Parameters:
<index>: integer type values in the range of location numbers of phonebook memory
<number>: string type phone number of format <type>
<type>: type of address octet in integer format (GSM 04.08, subclause 10.5.4.7) ;
default 145 when dialling string includes international access code character "+",
otherwise 129
<text>: string type field of maximum length <tlength>; character set as specified by
command Select TE Character Set +CSCS
<nlength>: integer type value indicating the maximum length of field <number>
<tlength>: integer type value indicating the maximum length of field <text>
Used to enter device passwords that ME is querying, or to query whether ME is
currently querying a password. When last executed AT command failed in
PIN2/PUK2 authentication error (or security code error in case of memory updating),
read command shall return PIN2/PUK2 (or security code) <code> although the
operation of ME is not blocked. (GSM 07.07 section 8.3.)
Syntax:
AT+CPIN=<pin>,<newpin>
AT+CPIN?
AT+CPIN=?
Parameters:
<pin>, <newpin>: string type values
This command selects memory storages to be used for reading/deleting <mem1>,
writing/sending <mem2>, and receiving <mem3> short messages. Amount of used
and available message locations in each memory is returned as response. (GSM
07.05 section 3.2.2.)
Copyright © 2000. Nokia Mobile Phones. All rights reserved.
The default option is [,,129/145].
Show supported values.
Response is +CPBW: (<index>-
list),[<nlength>], (129,145),[<tlength>]
Query current setting.
Response is +CPIN: <code>
Shows whether command has been
implemented.
32

Advertisement

Table of Contents
loading

Table of Contents