At+Cmee Report Terminal Error; At+Cpas Terminal Activity Status - Nokia PremiCell Manual

AT+CMEE Report Terminal Error

This command disables or enables the use of the result code +CME
ERROR: <err> as an indication of an error relating to the function-
ality of the terminal . When enabled, terminal related errors cause
the +CME ERROR: <err> result code instead of the regular ERROR
result code. ERROR is returned normally when the error is related to
syntax, invalid parameters, or data adapter functionali-
ty.
AT+CMEE=[<mode>]
code.
AT+CMEE?
AT+CMEE=?
+CMEE:
Values for <mode>:
0
1
2

AT+CPAS Terminal Activity Status

This command returns the activity status of the terminal. It can be
used to interrogate the terminal before requesting action from it.
Syntax:
AT+CPAS
<pas>.
AT+CPAS=?
+CPAS:
Values for <pas>:
0
18
Enable or disable terminal error result
Query current setting. Response is
+CMEE:<mode>.
Show supported modes. Response is
(list of supported <mode>s).
disable the result code and use ERROR instead
enable the result code and use numeric values
enable the result code and use verbose values
Query terminal status. Response is +CPAS:
Show supported status values. Response is
(list of supported <pas>s).
ready (terminal allows commands from DTE)
ã2000 Nokia Mobile Phones. All Rights Reserved.
Syntax: