Clip Calling Line Identification Presentation; Clir Calling Line Identification Restriction; Cmee Report Mobile Equipment Error - Nokia 8850 Command List

+CLIP Calling Line Identification Presentation

+CLIR Calling Line Identification Restriction

+CMEE Report Mobile Equipment Error

AT Command Set for Nokia 8850
<classx>:
1
2
4
also all other values below 128 are
reserved
Controls presentation of +CLIP unsolicited result code or returns CLIP subscription
status from network. If product does not support network status query, <m> shall
always equal 2. (GSM 07.07 section 7.6.)
Syntax:
AT+CLIP=<n>
AT+CLIP?
AT+CLIP=?
Enables/disables own number sending to network or returns CLIR subscription status
from network. If product does not support network status query, <m> shall always
equal 2. (GSM 07.07 section 7.7.)
Syntax:
AT+CLIR=<n>
AT+CLIR?
AT+CLIR=?
This command controls the presentation of extended error information result code.
See also result code +CME ERROR. (07.07 section 9.1.)
Syntax:
AT+CMEE=<n>
AT+CMEE?
AT+CMEE=?
Parameters:
<n>:
0
1
2
Copyright © 2000. Nokia Mobile Phones. All rights reserved.
is a sum of integers each representing a
class of information (default 7 equals to all
classes):
voice
data
fax
The default option is 0.
Query current setting.
Response is +CLIP: <n>,<m>
Show supported values.
Response is +CLIP:(list of supported
<n>'s).
The default option is 0.
Query current setting.
Response is +CLIR: <n>,<m>
Show supported values.
Response is +CLIR: (list of supported
<n>'s).
Default option is 0.
+CMEE: <n>
Response is +CMEE: (list of supported
<n>'s).
disable +CME ERROR: <err> result code
and use ERROR instead
enable +CME ERROR: <err> result code
and use numeric <err> values
enable +CME ERROR: <err> result code
and use verbose <err> values
20