Reporting Options Commands; At+Clip Calling Line Identification Presentation - Nokia PremiCell Manual

AT+IPR=<rate>
AT+IPR?
AT+IPR=?
Values for <rate>:
300
1200
2400
4800
9600
19200

2.5. Reporting Options Commands

AT+CLIP Calling Line Identification Presentation

This command refers to the GSM supplementary service CLIP (Call-
ing Line Identification Presentation) that enables a called subscriber
to obtain the calling line identity (CLI) of the calling party when re-
ceiving a mobile terminated call. With this command, the user can
enable or disable the presentation of the CLI on the DTE. It has no
effect on the execution of the supplementary service CLIP in the
network.
AT+CLIP=[<mode>] Set CLIP mode.
AT+CLIP?
AT+CLIP=?
Values for <mode>:
ã2000 Nokia Mobile Phones. All Rights Reserved.
Set DTE rate.
Query current setting.
Response is +IPR:<rate>.
Show valid range of rate.
Response is +IPR:(0, 300, 1200, 2400, 4800,
9600,19200).
Query current setting.
Response is +CLIP:<mode>,2.
Show supported modes.
Response is +CLIP: (list of supported <mode>s).
Syntax:
29