Locomotive Operation And Maintenance; Adjusting The Volume Using The Flyerchief Remote; Servicing Your Locomotive's Leds - Lionel FlyerChief GP7 Owner's Manual

Locomotive operation and maintenance

Adjusting the volume using the FlyerChief remote

T
o turn off the locomotive's diesel background sounds, slide the SOUND switch to the OFF position.
Refer to Figure 1 on page 5 for the location of this switch.
The overall volume of the sounds in your locomotive can be adjusted, but this requires the use of
the FlyerChief remote (in remote operation mode). To enter Volume Control Mode, place the remote
on a flat surface. Using one hand, press the HORN and BELL buttons simultaneously. After three
seconds, the remote's red LED will begin to flash, acknowledging that you are in volume adjustment
mode. Keep the HORN and BELL buttons depressed.
Using your other hand turn the speed control knob up or down to adjust the volume to your prefer-
ence. Release the HORN and BELL buttons to exit volume adjustment mode.

Servicing your locomotive's LEDs

Y
our locomotive is equipped with three LED-style lamps for longer life. Please contact your
Factory Trained Authorized Lionel Service Station or Lionel Customer Service if LED replacement
is required.
16