Table of Contents
Advertisement
Rev B: December 2006
DEMl)Cii
3. Installation Instructions
This section contains instructions for the unpacking, placement and installation of the Pro-
Tester™. Carefully review the following information, sub-sections and each procedure before
beginning unpacking and installation of the system.
The Pro-Tester™ comes complete in a reusable portable shipping/transport container.
The
system can be operated from within the container our removed and placed onto a work bench or
appropriate platform for use. When not in use the Pro-Tester™ should always be stored in the
shipping/transport container to protect if from the elements and potential damage.
Note: The system illustrated in this manual shows ALL available features for the Pro-
Tester™, therefore, your system may vary slightly in appearance from that depicted.
3.1. Unpacking and Preparation
1.
Before opening the shipping/transport container and unpacking the system, inspect the
outside of the container thoroughly for any signs of mishandling or damage during
shipping. Report any damage to the shipping carrier immediately and do not proceed
with unpacking. Since the shipment is made FOB
factory,
you should consult your
administration concerning claims for shipping damage.
Please notify DEMTECH
Services, Inc. immediately in writing of any shipping damage.
2. Unlatch and open the shipping/transport container lid and inspect inside the container and
equipment thoroughly for any signs of mishandling or damage during shipping. Report
any damage to the shipping carrier immediately and do not proceed with unpacking.
Since the shipment is made FOB factory, you should consult your administration
concerning claims for shipping damage.
Please notify DEMTECH Services, Inc.
immediately in writing of any shipping damage.
3. Make note of the orientation of the equipment and packing foam inserts inside the
shipping container to facilitate any repackaging requirements in the future.
Page
3
Pro-Tester™ Operator's Manual
T-Manual RB
Advertisement
Table of Contents
Need help?
Do you have a question about the Pro-Tester T-0100 and is the answer not in the manual?
Questions and answers