Settings - Demtech Pro-Tester T-0100 Operator's Manual

DEMliCH
Rev B: December 2006
3. 4. Settings
The Pro-Tester™ requires various settings for proper operation. These settings are easily
accessed via the Menu Mode of operation. To enter the Menu Mode make sure the Pro-
Tester™ is on and at the main operating screen (Refer to Appendix B). Simultaneously press
and hold the YES and NO buttons on the Control Panel for several seconds. This procedure
puts the system into Menu Mode. This mode of operation allows the user the set various
system parameters. For a complete listing of all of the features refer to Appendix B located
at the back of this manual.
All of the settings required to operate the Pro-Tester™ come factory set for most users and
should not need setting. However, if your particular installation requires setting any
parameters enter the Menu Mode and follow the screen prompts to navigate the screen menu.
Appendix B is a Menu Tree drawing. This drawing can be very helpful if you are trying to
find a particular function or setting you wish to access. Use the drawing to locate the
particular item you want to access. Once located, follow the tree back to the top level. Next,
utilizing the user interface on the Pro-Tester™, proceed back down through the menu
structure using the drawing as a guide to access the particular screen you want.
T-Manual
RB
Pro-Tester™ Operator's Manual Page 8