Automate Voicemail - Nokia 6610 User Manual

• Press Menu 01-4-1 (Messages > Voice messages > Listen to
voice messages). After a brief pause, your phone dials the
voicemail number.
Once you connect and the pre-recorded greeting begins, follow the
automated instructions to listen to your voice messages.

• AUTOMATE VOICEMAIL

You can insert special characters called "dialing codes" into phone numbers
such as voicemail and then save the number to a 1-touch dialing location.
Dialing codes instruct the receiving system to pause, wait, bypass, or
accept the numbers that follow them in the dialing string.
Note: Each voicemail service can vary. The examples and steps that
follow are for clarification. Check with your wireless provider if you
have specific questions about your voicemail service.
Write down some information
Write down your voice mailbox number.
1
Call and check your voicemail as you normally would.
2
3 Write down your interaction with the recorded prompts step-by-step.
Keep in mind that each voicemail service may vary. However, it should
look something like this:
Dial 2145551212, pause 5 seconds, press 1, pause 2 seconds, press 1234,
press pound key.
Important: Be precise, you'll need this information in "Setup
voicemail with dialing codes" later in this section.
a
LEARN HOW TO INSERT DIALING CODES
Press repeatedly to cycle through dialing codes. Once the desired code
appears in the display, pause briefly and the code is inserted into the
dialing string.
For example, press
briefly and the wait character is inserted into the dialing string. Available
dialing codes are as follows:
a
four times to display the "w" (wait character). Pause
[ 71 ]
Menu functions