Table of Contents
Advertisement
• AUTOMATE VOICEMAIL WITH DIALING CODES
You can insert special characters called "dialing codes" into phone numbers
such as Voicemail and then save the number to a 1-touch dialing location.
Dialing codes instruct the receiving system to pause, wait, bypass, or accept
the numbers that follow them in the dialing string. See "Use special
characters" on page 35.
Important: If you enter your PIN as part of the automated dialing
process, anyone who has access to your phone will be able to access
your voicemail as well. To prevent unauthorized use of your phone,
see "Manage phone security" on page 111.
Note: Each voicemail service can vary. The examples and steps
that follow are for clarification. Check with your wireless provider
if you have specific questions about your voicemail service.
Write down some information
1 Write down your voice mailbox number.
2 Call and check your voicemail as you normally would.
Write down your interaction with the recorded prompts. Keep in mind
that each Voicemail service may vary. However, it should look something
like this:
Dial 2145551212, pause 5 seconds, press 1, pause 2 seconds, enter 1234,
press (pound).
Important: Be precise, you will need this information in Setup
voice-mail with dialing codes below.
INSERT DIALING CODES
Press
to cycle through available dialing codes. Once the desired code
appears, pause briefly to insert the code into the dialing string. See "Use
special characters" and "In 123 mode" on page 36 for details.
[ 63 ]
Use voice features
7
Advertisement
Table of Contents
