Table of Contents
Advertisement
•
Press Listen if there is a notification message in the display
•
Press Menu 01-9-1 (Messages > Voice messages > Listen to
voice messages). After a brief pause, your phone dials the
voicemail number.
Once you connect and the pre-recorded greeting begins, follow the
automated instructions to listen to your voice messages.
• AUTOMATE VOICEMAIL
You can insert special characters called "dialing codes" into phone numbers
such as voicemail and then save the number to a 1-touch dialing location.
Dialing codes instruct the receiving system to pause, wait, bypass, or
accept the numbers that follow them in the dialing string.
Note: Each voicemail service can vary. The examples and steps
that follow are for clarification. Check with your wireless provider
if you have specific questions about your voicemail service.
Write down some information
1 Write down your voice mailbox number.
2 Call and check your voicemail as you normally would.
3 Write down your interaction with the recorded prompts step-by-step.
Keep in mind that each voicemail service may vary. However, it should
look something like this:
Dial 2145551212, pause 5 seconds, press
1234, press
Important: Be precise, you will need this information in "Set up
voicemail with dialing codes" on page 46.
LEARN HOW TO INSERT DIALING CODES
Press
repeatedly to cycle through dialing codes. Once the desired
code appears, pause briefly to insert the code into your dialing string.
.
[ 45 ]
Use voicemail
, pause 2 seconds, enter
Advertisement
Table of Contents
