Automate Voicemail - Nokia 6100 User Manual

3 If the box is empty, enter the voice mailbox area code and number.
4 Press OK. Your phone confirms the number has been saved.
Tip: Save yourself the trouble of entering the mailbox codes each
time you dial voicemail. See "Automate voicemail" later in this
section for more information.
Call and setup your voicemail
1 Once you've saved the voice mailbox number, press and hold
2 When you connect to voicemail and the pre-recorded greeting begins,
follow the service's automated instructions to setup your voicemail.
Listen to your voice messages
Once you've setup voicemail, you can dial the number in one of 4 ways:
• Dial the number using the keypad
• Press and hold
• Press Listen if there's a notification message in the display
• Press Menu 01-4-1 (Messages > Voice messages > Listen to
voice messages). After a brief pause, your phone dials the
voicemail number.
Once you connect and the pre-recorded greeting begins, follow the
automated instructions to listen to your voice messages.

• AUTOMATE VOICEMAIL

You can insert special characters called "dialing codes" into phone numbers
such as voicemail and then save the number to a 1-touch dialing location.
Dialing codes instruct the receiving system to pause, wait, bypass, or
accept the numbers that follow them in the dialing string.
Note: Each voicemail service can vary. The examples and steps
that follow are for clarification. Check with your wireless provider
if you have specific questions about your voicemail service.
1
[ 75 ]
Menu functions
1
.