Save The Voice Mailbox Number; Automate Voicemail With Dialing Codes; Write Down Some Information - Nokia 6590 User Manual

• SAVE THE VOICE MAILBOX NUMBER

1 Press Menu 01 10 2 (Messages > Voice messages > Voice mailbox
number).
2 Enter your voice mailbox number, then press OK.
Note: The number can be up to 32 digits long.

• AUTOMATE VOICEMAIL WITH DIALING CODES

You can insert special characters called "dialing codes" into phone
numbers such as voice mail and then save the number to a 1-touch
dialing location. Dialing codes instruct the receiving system to pause,
wait, bypass, or accept the numbers that follow them in the dialing string.
See "Use special characters" on page 36.
Note: Each voicemail service can vary. The examples and steps that follow are
11
for clarification. Check with your wireless provider if you have specific
questions about your voicemail service.

Write down some information

1 Write down your voice mailbox number.
2 Call and check your voicemail as you normally would.
3 Write down your interaction with the recorded prompts. Keep in mind
that each voice mail service may vary. However, it should look
something like this:
Dial 2145551212.pause 5 seconds, press 1, pause 2 seconds, enter
1234, press (pound)
Important:: Be precise, you'll need this information in Setup voice-mail with
dialing codes below.
INSERT DIALING CODES
Press (star) to cycle through available dialing codes. Once the desired code
appears, pause briefly to insert the code into the dialing string.
[ 66 ]