Table of Contents
Advertisement
Installing the memory module
1. Insert the memory module into the memory connector.
2. Press the memory module down until it clicks into place.
3. Install:
a.
base cover
b.
optical drive
c.
hard drive
d.
battery
4. Follow the procedure in
Chasis Frame
Removing the docking board
1. Follow the procedure in
2. Remove the:
a.
battery
b.
base cover
3. To remove the docking board:
a. Disconnect the antenna cables from the docking board [1].
CAUTION:
Exercise caution while disconnecting the antenna cables. Improper removal may result in
damage/breakage of the antenna cables.
b. Unroute the antenna cables [2].
c. Remove the screws that secure the docking board to the computer [3].
d. Flip the docking board [4].
e. Lift the release tab [5].
f. Disconnect the docking board connector cable from the system board [6].
After working inside your
Before working inside your
computer.
computer.
Disassembly and reassembly
27
Advertisement
Table of Contents
