Trim Panel Components - BMW S 1000 RR 2021 Rider's Manual

212 MAINTENANCE

TRIM PANEL COMPONENTS

Remove the side panel
The procedure described
here for the right side
panel applies by analogy to the
left side as well.
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Remove screws 1.
Remove screws 2.
Bend engine spoiler 2 down-
wards slightly and remove
bolt 1.
Loosen fairing side panel 1
from grommets 2 and re-
move.
Installing side panel
Insert fairing side panel 1 into
grommets 2.
Bend engine spoiler 2
downwards slightly and install
bolt 1.