Table of Contents
Advertisement
Remove nuts 1 and 2 on the
left and right and remove mir-
rors.
Carefully thread out cable.
Secure fairing 1 at the left
and right fairing bracket 2.
If cable ties are used, affix
adhesive tape as protection
at the points where chafing
might occur.
Use the M Cover Kit from
BMW Motorrad to cover
the threaded holes for the
screws so that the parts can
subsequently be re-installed.
The M Cover Kit also includes
blanking plugs to prevent
moisture from making its
way into the vehicle electrical
system.
Position air inlet flap 1 and
clip in at the top 2.
Position windscreen in
the direction of arrow.
Install bolts 1 and 2.
Windscreen to air intake
M5 × 16
1 Nm
Installing mirrors
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
155
Advertisement
Chapters
Table of Contents
