Coolant - BMW S 1000 RR 2021 Rider's Manual

198 MAINTENANCE
To increase clutch play:
Tighten adjusting screw 2
into the handlebar fitting.
To reduce clutch play: Back
off adjusting screw 2 in the
handlebar fitting.
The distance between
lock nut and nut (meas-
ured internally) must not ex-
ceed 14 mm.
Consult a specialist workshop,
preferably an authorised
BMW Motorrad Retailer,
should it only be possible to
set the correct clutch play by
unscrewing further.
Check the clutch-lever play
( 197).
Tighten lock nut 1 while hold-
ing adjusting screw 2.

COOLANT

Checking coolant level
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Turn the handlebars all the
way to the left.
Check the coolant level in ex-
pansion tank 1. Viewing dir-
ection: From in front toward
the inside of the right side
panel.
Coolant, specified level
between MIN and MAX mark
on the expansion tank (cold
engine)
If the coolant drops below the
permitted level:
Top up the coolant.