Gearshift-Pattern Reverser - BMW S 1000 RR 2021 Rider's Manual

Installing tail-hump trim panel
( 214).
GEARSHIFT-PATTERN RE-
VERSER
Shift pattern for racing
The shift pattern can be re-
versed for racing by changing
the position of the selector
rod. Reversing the shift pat-
tern means that the gearshift
lever is lifted up for 1st gear
and pressed down for all the
other gears. This is the reverse
of the arrangement for riding
on public roads.
Reversing the shift pattern
ATTENTION
Riding with shift pattern re-
versal on public roads
Voiding of homologation for
riding on public roads
Do not install the gearshift-
pattern reverser for riding
on public roads.
Clean thread 1.
Pull off protective cap 2 and
slide on the gearshift rod 4.
Remove bolt 3 with washer.
Transfer the gearshift rod 4
to the thread for the inverted
gearshift pattern 1.
Insert bolt 1 through ball
joint 2 and washer 3.
Install bolt 1 in thread for in-
verted gearshift pattern 4.
Selector rod to gearshift
lever
M6 x 20
Thread-locking compound:
micro-encapsulated
8 Nm
167