BMW S 1000 RR 2021 Rider's Manual page 166

160 ON THE RACE TRACK
Carefully clip in rear trim
panel in the direction of
arrow.
Install bolts 1 and 2.
with two-up riding package
Install the passenger seat
( 78).
Install the tail-hump cover
( 77).
Installing number plate carrier
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
with two-up riding package
Remove the passenger seat
( 77).
Remove the tail-hump cover
( 77).
Remove screws 1 and 2.
Unclip left and right rear trim
panels carefully in the direc-
tion of arrow.
OE
Carefully unclip left and right
OE
rear trim panels 1, first hori-
zontally 2, then vertically 3.