2.17 Removing the Regulator Seal Ring
2.18 Installing the Regulator Seal Ring
(1)
Remove the seal ring and discard.
(2)
Remove the size 24 orange O-ring and discard.
(1)
Roll the new seal ring above the regulator outlet and seat
it into the groove.
NOTE:
Christo-Lube shall not be applied to this seal ring.
(2)
Roll the new size 24 orange O-ring onto the regulator
outlet and seat it into the groove.
NOTE:
Christo-lube shall not be applied to this O-ring.
NOTE:
An unseated seal can cause an air leak.
G1
Maintenance and Care
21
US