The following options are available for selection:
Active usage mode
Scroll to the desired option, and press
Select a usage mode
An active user profile always has a SIM card assigned to
it. When personalising user profile 1 or 2 for the first
time, observe the information set out in "First use" on
With the display in standby, press
To assign a new SIM card to the car kit, scroll to the
menu, and press
Settings for user 1
to select the desired item.
card, and press
to select it.
to access the menu.
to open it.
Settings for user
2, and press
to select this option.
Names of paired devices
If you select a mobile phone from the list of paired mobile
phones, the car kit attempts to establish a Bluetooth SIM access
profile connection to the paired mobile phone. You may be
prompted to enter the PIN code belonging to the remote SIM
card installed in the paired mobile phone.
The car kit asks if you wish to save the PIN code you entered for
a later automatic connection or whether to request
authorisation the next time a Bluetooth wireless link is to be
Car SIM card
This option assigns the car SIM card inserted in the radio unit to
the active user profile. If the feature that requests the PIN code
at power on is active, you are prompted to enter the PIN of the
car SIM card.
Some service providers may allow you to switch off the
prompt that requests you to enter the PIN at power on.
Check with your service provider.
Search for a phone with Bluetooth technology
This option assigns a remote SIM card installed in a compatible
mobile phone that is not paired with the car kit to the active
user profile. The car kit searches for mobile phones with
Bluetooth SIM access profile technology that are in range and
displays the related names in the list of Bluetooth devices.
Select a device, pair it with the car kit, and proceed as set out in
"Names of paired devices" on page 67.