Equaliser Settings; Function Test; Car Handset Hsu-4 (Not Included) - Nokia 616 User Manual

Equaliser settings

Car handset HSU-4 (9)
Mount the handset (not included in the sales package) in a
suitable location where it is easily accessible for the user.
Remember that all equipment must be mounted so that it does
not interfere with the operation of the vehicle.
The best location to mount the handset is horizontally on the
console between the driver's and front passenger's seats.
Contact your service technician for further detailed information
on alternatives for mounting the handset suitably in your
vehicle.
Check to make sure that deployment of the airbag is not
blocked or impaired in any way.
To replace the CUW-3 input device by the handset, with
ignition off remove the cable connection from the input device
to the radio unit, and insert the handset cable in the
appropriate socket in the radio unit.
Equaliser settings
Your car kit supports a variety of options for output over a
loudspeaker:
Direct connection to the SP-2 loudspeaker supplied in the
sales package.
Connection to a compatible car radio loudspeaker over an
additional relay that switches audio output to the
loudspeaker (not included in the sales package).
Connection to the compatible car radio loudspeakers using
the line-in input of your car radio. You must adjust the
audio level suitably if this option is selected.
76
To make audio settings in the standby display, press
Scroll to the Settings menu, and press
Scroll to Equaliser settings, and press
item.
Scroll to Loudspeaker or
select the desired option.

Function test

After your car kit has been installed, check that it is working
properly. When testing the operation of the equipment, also
check that it is mounted so that it in no way impairs the driver
during operation of the vehicle.
Note
To make a wireless connection between your car kit and
a compatible accessory with Bluetooth technology,
make sure that the devices are within the range
necessary for Bluetooth transmission. Remember that
external devices need to be supplied with sufficient
power for this feature (check the battery pack).
to open it.
to select this
Radio loudsp., and press
.
to