Cmt New Sms-Deliver; Cmti New Sms-Deliver Indication - Nokia 6090 Command Manual

+CMT New SMS-DELIVER

+CMTI New SMS-DELIVER Indication

Nokia 6090 AT Command Set
text mode:
+CMT: <oa>,[<alpha>],<scts> [,<tooa>,<fo>,<pid>,<dcs>,<sca>,
<tosca>,<length>]<CR><LF><data>
PDU mode:
+CMT: [<alpha>],<length> <CR><LF><pdu>
- when +CNMI=0:
routed messages are buffered into TA/ME (if buffer is full, 'memory capacity
exceeded' is sent to network)
- when +CNMI=1:
in on-line data state routed messages are rejected (e.g. 'memory capacity exceeded'
is sent to network and when command mode is entered 'memory available' is sent to
network); in command mode forwarded directly to TE
- when +CNMI=2:
in on-line data state routed messages are buffered into TA/ME (if buffer is full,
'memory capacity exceeded' is sent to network and when command mode is entered
'memory available' is sent to network); in command mode forwarded directly to TE
<alpha> not supported by Nokia 6090. See also command +CNMI, page 34. (GSM
07.05).
See details about +CNMI, page 34.
+CMTI: <mem>,<index>
- when +CNMI=0:
indications are buffered into TA/ME
- when +CNMI=1:
in on-line data state indications are discarded; in command mode forwarded directly
to TE
- when +CNMI=2:
in on-line data state indications are buffered into TA/ME; in command mode
forwarded directly to TE
See also command +CNMI, page 34
Copyright © 2001. Nokia Mobile Phones. All rights reserved.
82