Ckpd Keypad Control - Nokia 6090 Command Manual

+CKPD Keypad Control

Nokia 6090 AT Command Set
AT+CIND?
Request current status of indicators.
Response:
+CIND: 1,0,0
OK
Explanation:
message indicator is ON
call indicator is OFF
smsfull indicator is OFF
Execution command emulates ME keypad by giving each keystroke as a character in
a string <key>. <time> * 0.1 seconds is the time to stroke each key and <pause> *
0.1 seconds is the length of pause between two strokes.
The +CKPD command can be only executed, if the <keyp> value of the +CMEC
command is 2. See also +CMEC command, page 26.
Important note: This feature is available in SW version 5.300 or later.
Syntax:
AT+CKPD=<keys>[,<time>
[,<pause>]]
AT+CKPD=?
Parameters:
<keys>: string of characters representing keys as listed in the following table
<key>:
* or \2A
# or \23
0 or \30
1 or \31
2 or \32
3 or \33
4 or \34
5 or \35
6 or \36
7 or \37
8 or \38
9 or \39
C, c, \43 or \63
D, d, \44 or \64
E, e, \45 or \65
M, m, \4D or \6D
S, s, \53 or \73
U, u, \55 or \75
V, v, \56 or \76
\5B
\5D
\5E
For some <key> parameter, you can also used their HEX values. This values must
be indicated with a "\".
In example.: "c" -> "\63"
"C" -> "\43"
The last three <key> values (soft key 1, soft key 2 and up arrow) can be only used
with their HEX values.
Default option is [,1,1].
OK
star (*)
hash (number sign)
key 0
key 1
key 2
key 3
key 4
key 5
key 6
key 7
key 8
key 9
clear display (C / CLR)
volume down
connection end
menu (MENU)
connection start (SEND)
volume up
down arrow
soft key 1 (also MENU key)
soft key 2 (also CLR key)
up arrow
21