Cssu Unsolicited Supplementary Service Notification; Cusd Network Initiated Unstructured Supplementary Service Data - Nokia 6090 Command Manual

+CSSU Unsolicited Supplementary Service Notification

+CUSD Network Initiated Unstructured Supplementary Service Data

Nokia 6090 AT Command Set
2
3
4
5
6
7
8
<index>: refer "Closed user group +CCUG"
See details about +CSSN Supplementary Service Notifications page 49.
+CSSU: <code2>[,<index>[,<number>, <type>[,<saddr>,<satype>]]]
is given when +CSSN=,1 and some supplementary service notification is given by
network during MT call setup or during a voice call; note that also remote release of a
held call is informed with this result code.
In MT call setup case, this result code is sent to TE after every (possible) +CLIP
result code. In case of a waiting call, this is given after +CCWA result code (but
discarded if TA is in on-line data. (GSM 07.07).
<code2>:
0
1
2
3
4
5
6
7
8
9
<index>: refer "Closed user group +CCUG"
<number>: string type phone number of format specified by <type>
<type>: type of address octet in integer format (GSM 04.08)
<saddr>: string type subaddress of format specified by <satype>
<satype>: type of subaddress octet in integer format (GSM 04.08)
See details about +CCWA page 17.
+CUSD: <m>,<str>,<dcs>
is given when +CUSD=1 and network initiated 'notify' or 'request' USSD message
received; discarded if in on-line data state (also when V.80 in-band mode is enabled).
Copyright © 2001. Nokia Mobile Phones. All rights reserved.
are active
call has been forwarded
call is waiting
this is a CUG call (also <index> present)
outgoing calls are barred
incoming calls are barred
CLIR suppression rejected
call has been deflected
this is a forwarded call (MT call setup)
this is a CUG call (also <index> present)
(MT call setup)
call has been put on hold (during a voice
call)
call has been retrieved (during a voice
call)
multiparty call entered (during a voice call)
call on hold has been released (this is not
a SS notification) (during a voice call)
forward check SS message received (can
be received whenever)
call is being connected (alerting) with the
remote party in alerting state in explicit
call transfer operation (during a voice call)
call has been connected with the other
remote party in explicit call transfer
operation (also number and subaddress
parameters may be present) (during a
voice call or MT call setup)
this is a deflected call (MT call setup)
80