Ccug Closed User Group; Ccwa Call Waiting - Nokia 6090 Command Manual

+CCUG Closed User Group

+CCWA Call Waiting

Nokia 6090 AT Command Set
Selects CUG information to be sent to network with dial command D (see page 58).
(GSM 07.07)
Syntax:
AT+CCUG=[<n>[,<index>[,<info>]]]
AT+CCUG?
AT+CCUG=?
Parameters:
<n>:
0
1
<index>:
0...9
<info>:
0
1
This command allows control of the call waiting supplementary service and
presentation of +CCWA unsolicited result code according to GSM 02.83. When
status request response from network indicates that SS is active for specific data
bearer services (e.g. 'circuit async'), AT interface indicates only 'data' (=2) ('not
active' case is displayed only when SS is not active to any service; i.e. +CCWA: 0,7).
(GSM 07.07)
Syntax:
AT+CCWA=[<n>[,
<mode>[,<class>]]]
AT+CCWA?
AT+CCWA=?
Parameters:
<n>
0
1
<mode>
0
1
2
<classx>
1
2
4
also all other values below 128 are
reserved
<status>:
0
1
Default option is 0,0,0.
Query current setting.
Response is +CCUG: <n>,<index>,<info>
OK
disable CUG temporary mode
enable CUG temporary mode
CUG index
no information
suppress OA
When <mode>=2: the response is
+CCWA: <status>,<class1>
[<CR><LF>+CCWA: <status>,<class2>
[...]] Default option is 0[,,7].
Query current setting.
Response is +CCWA:<n>
Show supported values.
Response is +CCWA:(list of supported
<n>'s).
(sets/shows the result code presentation
status in the TA):
disable
enable
(when <mode> parameter is not given,
network is not interrogated):
disable
enable
query status
is a sum of integers each representing a
class of information (default 7 equals to all
classes):
voice
data
fax
not active
active
17