POVISON DT046AW14 Installation Instructions

1.Confirm installation steps (please verify the list when unpacking)
3.Connect the frame with table legs.
Self-tapping screws
(M4*16)
2.Upside down the stand and the base, connect with hexagonal machine
wires and gasket.
③
②
①
4.Installation finished.
(1).Put the flat head machine
wire in the place where the
support frame is connected
with the table leg, and
tighten it with an Allen
screwdriver.
Flathead machine screws+Gaskets
（M8*60mm）
(2).Place the desktop on top of
the support frame, and tighten
the frame and the support frame
with self-tapping screws.
(1).Put the hexagonal machine wire in
the hole and tighten with a wrench.
Flathead machine screws+Gaskets
（M8*20mm）
Installation instruction
Product name:DT046AW14/16
RECOMMENDED NUMBER OF INSTALLERS: 2
① Please read the manual carefully
before installing this product.
And strictly follow the
installation process
② Please take good care of this
manual for your next installation
Parts list
Serial
Shape
Name Quantity
number
Flathead machine screws
A
(M8*60)
Flathead machine screws
B
(M8*20)
Self-tapping screws
C
(M4*16)
Gaskets
D
TotaL 1 page; page 1
8
8
6
16