Download Print this page

Advertisement

Quick Links

Safety Notice
The manufacturer is discharged from liability when damage
is caused by improper use or installation.
If any luminaire and/or accessory is subsequently modi-
fied, the persons responsible for the modification shall be
considered as manufacturer.
Product Information / Surge Protection
As an option, this luminaire can also be fitted with a surge
protector of Type 2-3 (at the time of order). The technical
data can be found directly on the installed device. If the
surge protector has been triggered by an adverse event,
the luminaire is automatically disconnected from the
mains. In that case, the LED on the surge protector no
longer lights up.
For comprehensive protection of the luminaire against
lightning and electrical surges, primary (Type 1) and
secondary (Type 2) surge arrestors must be installed into
the power supply. We recommend a combination arrestor
(Type 1+2+3), which is installed in the control cabinet.
WE-EF LIGHTING USA
Tel +1 724 742 0030
info.usa@we-ef.com
we-ef.com
The technical planner/installer is responsible for the pro-
per selection, sizing and installation of the surge protection
modules that must be provided on site. Please note the
various protection levels for Class I and II, as well as the
applicable statutory provisions regarding surge protection.
Installation and maintenance may only be performed by a
qualified electrician.
RMC320_241121 / 006-1335
Technical specifications are subject to change.
© WE-EF 2022
WE-EF LIGHTING
Installation and
Maintenance Instructions for
Post Top Luminaire
RMC320 LED

Advertisement

loading
Need help?

Need help?

Do you have a question about the RMC320 LED and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for WE-EF RMC320 LED

  • Page 1 In that case, the LED on the surge protector no Installation and maintenance may only be performed by a RMC320 LED longer lights up. qualified electrician. For comprehensive protection of the luminaire against...
  • Page 2 Windage area ..... . max. 0.50 ft² www.we-ef.com legislation. Installation: horizontal, light output downwards Class I, ta = 40 °C...
  • Page 3 Procedure wall mounting installation ~ 2.5 in PE ~ 180° Luminaire prewired, do not open! 1) Switch off the mains electrical supply. For larger cable diameters of 0.354 – 0.472 in the enclosed cable entries must be used. Then tighten the pressure screw firmly. To fix the mounting flange J, insert screws L, and fig.
  • Page 4 For protection class II, the earthing is omitted. Screw the gland nut together, tightening to a torque of 5 Nm (44.3 in-lb) (fig. 5). For ON/OFF 0-10 V Individual wiring Through wiring Individual wiring Through wiring WE-EF Eco Step Dim® Advanced / ON-OFF 1-10V / DALI...