28 | ENGLISH
Dismounting of the motor
1.
Turn off the power and use
hand crank to open the awning.
4.
Use a screwdriver to pick off
the screws of hood locking plate.
7.
Pull the motor and the hood
locking plate out of the roller tube.
2.
Use a 4# Allen wrench to re-
move the screws of hood side cap.
5.
Separate the connector of the
LED strip and the one of the motor.
8.
Use pliers to remove the cotter.
3.
Remove the hood side cap.
6.
Separate motor and crown.
9.
Separate locking plate and mo-
tor.