Hornbach 10461614 Instructions Manual page 27

27 | ENGLISH
Dismounting of the LED strips
1.
Turn off power and use hand
crank to open the awning, or turn
power off after opening the awn-
ing electrically.
4.
Open the wire holders of
the LED strips in the arms, then
unplug the connectors of the LED
strips and the one in the front bar.
7.
Open the wire holders and un-
plug the wire connectors.
2.
Unplug the wire connectors
inside the hood and the LED strips
in the arms.
5.
Pull out the old LED strip from
the slot of arms.
8.
Remove the side caps of the
left and right front bar.
3.
Unplug the connectors of
the LED strips from the shoulder
bracket.
6.
Open the wire holder inside
the front bar.
9.
Pull the LED strip out of the
slot of the front bar.