Angelo Decor Canyon Creek Manual

Canyon Creek™ Fountain
We hope you will find these instructions helpful in setting up your product.
If you have any issues with this item, DO NOT return the unit to place of purchase.
Please visit our web site www.angelodecor.com for assistance and warranty information.
Carefully unpack and arrange all parts
in your workspace.
Securely connect the light cord to Securely connect the light cord to
the included transformer.
Install the pump access door.
The final assembly
should look like this
Fill with clean water and plug into a grounded GFCI outlet.
The pump must be fully submersed at all times to avoid pump burnout.
Product must be properly stored for winter.
Pass the cord from the pump and
light through the opening and out
the base.
Locate and connect the pump to Locate and connect the pump to
the pre-installed tubing. Place the
pump flat inside the opening.
AD97740W
Align both cords with the groove
at the base.
Carefully place the accent lights in Carefully place the accent lights in
the location of your chosing inside
the reservoir.