Related Manuals for turck PSU67-3P-1H2-1H0-24250-IOL
Summary of Contents for turck PSU67-3P-1H2-1H0-24250-IOL
- Page 1 Your Global Automation Partner PSU67-3P-1H2-1H0-24250-IOL Smart switching power supply in IP65/IP67 Instructions for Use...
-
Page 2: Table Of Contents
8.2.3 Index 0x02: System commands (according to IO-Link specification)...... 18 8.2.4 Index 0x0C: Device Access Locks..................... 18 8.2.5 Parameters............................ 18 V01.00 | 2023/01 | 2 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... - Page 3 Efficiency and power losses .................. 31 13.4 IO-Link interface...................... 31 13.5 General technical data .................... 32 14 Turck subsidiaries — contact information.................. 35 V01.00 | 2023/01 | 3 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
-
Page 4: About These Instructions
If you have any suggestions for improving the design or if some information is missing in the document, please send your suggestions to techdoc@turck.com. V01.00 | 2023/01 | 4 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 5: Notes On The Product
The scope of delivery includes: IP65/IP67 power supply Quick Start Guide Turck service Turck supports you with your projects, from initial analysis to the commissioning of your applic- ation. The Turck product database under www.turck.com contains software tools for program- ming, configuration or commissioning, data sheets and CAD files in numerous export formats. -
Page 6: For Your Safety
The product is designed according to state-of-the-art technology. However, residual risks still exist. Observe the following warnings and safety notices to prevent damage to persons and property. Turck accepts no liability for damage caused by failure to observe these warning and safety notices. -
Page 7: Product Description
Shutdown Power Manager Power IO-Link Converter Control Data Input Fuse Output Filter Output Rectifier Inrush Current Limiter Fig. 2: Block diagram V01.00 | 2023/01 | 7 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 8: Operating Elements
Operator interface (LEDs and buttons) Functional principle The device converts an AC input voltage of 320…550 VAC into a 24 VDC output voltage. V01.00 | 2023/01 | 8 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 9: Functions And Operating Modes
If an external fuse is used, type B or C circuit breakers of at least 6 A have to be used to prevent unwanted tripping of the circuit breaker. V01.00 | 2023/01 | 9 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... - Page 10 Such use is not included in the approval according to UL 61010 and IEC 62368. PSU67 open Fig. 4: 2-phase operation /VAC Fig. 5: Performance in 2-phase operation V01.00 | 2023/01 | 10 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
-
Page 11: Dc Voltage Output
Fig. 6: Hold-up time vs. input voltage L1 L2 L3 Input Voltage -5 % Output Voltage Hold-up Time Fig. 7: Shutdown behavior V01.00 | 2023/01 | 11 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 12: Io-Link Interface
Link during commissioning for example, are stored in the EEPROM of the device and are avail- able even if the IO-Link communication fails. V01.00 | 2023/01 | 12 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 13: Installing
TN, TT, IT delta mains systems or IT star mains systems without insulation monitoring: Use in zones of overvoltage category II up to 2000 m (6560 ft) V01.00 | 2023/01 | 13 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 14: Connecting
2 = n.c. 3 = GND 4 = C/Q (IO-Link) 5 = n.c. Fig. 10: Pin assignment - IO-Link interface (X0) V01.00 | 2023/01 | 14 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 15: Commissioning
Commissioning Commissioning After connecting the wires and by switching on the AC input voltage, the device automatically goes into operation. V01.00 | 2023/01 | 15 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 16: Setting
All LEDs flash for 5 s to indicate that the key lock status has changed. The display returns to normal operation. V01.00 | 2023/01 | 16 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 17: Setting The Device Via Io-Link
Firmware revision of the device, e. g. V1.0.7.0 (23) 0x18 Application Specific Tag Default "***" (24) Field for customer or application specific data V01.00 | 2023/01 | 17 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 18: Index 0X02: System Commands (According To Io-Link Specification)
(103) 0x68 PSU total output current Pre-alarm level UINT16 A/bit RW (104) 0x69 Output Voltage Setpoint UINT16 V/Bit RW (105) V01.00 | 2023/01 | 18 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... - Page 19 Default values are shown in bold. Unit: A/bit Value range: 256…25600 = 1…100 A Default value: 5120 = 20 A V01.00 | 2023/01 | 19 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
- Page 20 Default values are shown in bold. Unit: V/bit Value range: 6144…7168 = 24…28 V Default value: 6272 = 24.5 V V01.00 | 2023/01 | 20 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
-
Page 21: Operating
Actual output total current A/bit UINT16 Total output current (actual value) Actual output voltage 1 V/bit UINT16 Actual Output Voltage V01.00 | 2023/01 | 21 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 22: Diagnostic And Status Messages (Acyclic Io-Link Data)
0: < 5 % 1: > 5 % 2: > 25 % 3: > 50 % 4: > 75 % V01.00 | 2023/01 | 22 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... - Page 23 Uptime since last 0x53 Parameter access via sub index 0 only turn-on (83) Hours UINT32 39…8 Hours UINT8 7…0 Value range: 0…59 V01.00 | 2023/01 | 23 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
- Page 24 The temperature in the device is too high. perature exceeded 0x6320 Parameter error Error The parameter settings of the device are invalid. V01.00 | 2023/01 | 24 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
-
Page 25: Io-Link Error Codes
0x8041 Inconsistent parameter set Parameters inconsistent, device plausibility check failed 0x8082 Application not ready Device not ready, access denied V01.00 | 2023/01 | 25 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 26: Maintenance
Observe our return acceptance conditions when returning the device to Turck. 11.1 Returning devices Returns to Turck can only be accepted if the device has been equipped with a Decontamination declaration enclosed. The decontamination declaration can be downloaded from https://www.turck.de/en/retoure-service-6079.php and must be completely filled in, and affixed securely and weather-proof to the outside of the packaging. -
Page 27: Technical Data
3 AC, 480 V typ. 0.95, at 500 W AC Input Range /VAC Fig. 11: Voltage range – input voltage AC V01.00 | 2023/01 | 27 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... - Page 28 0.90 0.85 3 × 480 Vac 0.80 0.75 0.70 Fig. 14: Power factor vs. output power (at 24 VDC output voltage) V01.00 | 2023/01 | 28 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
-
Page 29: Dc Output
(max. 5 s) continuous - 25 + 45 + 55 + 70 T/°C Fig. 15: Derating – output power vs. ambient temperature V01.00 | 2023/01 | 29 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... - Page 30 Fig. 17: Output voltage vs. output current, at continuous load, typ. Normal Normal operation Short-circuit operation Fig. 18: Short-circuit at output, Hiccup mode, typ. V01.00 | 2023/01 | 30 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
-
Page 31: Efficiency And Power Losses
IO-Link version V1.1 Baud rate COM3 (230.4 kBaud) Cycle Time 2 ms SIO Mode Supported Process data length 23 byte V01.00 | 2023/01 | 31 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 32: General Technical Data
S. fig.: Output power vs. ambi- ent temperature [} 29] Altitude Max. 5000 m (16 400 ft) S. fig.: Output power vs. alti- tude [} 29] V01.00 | 2023/01 | 32 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... - Page 33 Max. 32.5 VDC redundant circuit limits the maximum output voltage. The output shuts down and auto- matically attempts to restart. V01.00 | 2023/01 | 33 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
- Page 34 350 W at max. 60 °C - 25 + 45 + 55 + 70 T/°C Fig. 21: Derating – standard mounting orientation V01.00 | 2023/01 | 34 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
-
Page 35: Turck Subsidiaries - Contact Information
Baner-Balewadi Link Rd., 411045 Pune - Maharashtra www.turck.co.in Italy TURCK BANNER S.R.L. Via San Domenico 5, IT-20008 Bareggio (MI) www.turckbanner.it V01.00 | 2023/01 | 35 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... - Page 36 Inönü mah. Kayisdagi c., Yesil Konak Evleri No: 178, A Blok D:4, 34755 Kadiköy/ Istanbul www.turck.com.tr Turck Inc. 3000 Campus Drive, USA-MN 55441 Minneapolis www.turck.us V01.00 | 2023/01 | 36 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
- Page 37 Over 30 subsidiaries and 60 representations worldwide! 100038504 | 2023/01 100038504 www.turck.com...
Need help?
Do you have a question about the PSU67-3P-1H2-1H0-24250-IOL and is the answer not in the manual?
Questions and answers