Related Manuals for turck PSU67-3P-1S-2L-24250-IOL-F
Summary of Contents for turck PSU67-3P-1S-2L-24250-IOL-F
- Page 1 Your Global Automation Partner PSU67-3P-1S-2L-24250-IOL-F Smart switching power supply in IP67 Instructions for Use...
-
Page 2: Table Of Contents
8.2.3 Index 0x02: System commands (according to IO-Link specification)...... 19 8.2.4 Index 0x0C: Device Access Locks..................... 19 8.2.5 Parameters............................ 20 V01.00 | 2022/09 | 2 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... - Page 3 Efficiency and power losses .................. 37 13.4 IO-Link interface...................... 37 13.5 General technical data .................... 38 14 Turck subsidiaries — contact information.................. 41 V01.00 | 2022/09 | 3 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
- Page 4 Table of Contents V01.00 | 2022/09 | 4 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
-
Page 5: About These Instructions
If you have any suggestions for improving the design or if some information is missing in the document, please send your suggestions to techdoc@turck.com. V01.00 | 2022/09 | 5 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 6: Notes On The Product
The scope of delivery includes: IP67 power supply Quick Start Guide Turck service Turck supports you with your projects, from initial analysis to the commissioning of your applic- ation. The Turck product database under www.turck.com contains software tools for program- ming, configuration or commissioning, data sheets and CAD files in numerous export formats. -
Page 7: For Your Safety
The product is designed according to state-of-the-art technology. However, residual risks still exist. Observe the following warnings and safety notices to prevent damage to persons and property. Turck accepts no liability for damage caused by failure to observe these warning and safety notices. -
Page 8: Product Description
[4.21] [7.21] [7.69] [0.18] M12 × 1 M12 × 1 M12 × 1 M12 × 1 mm [Inch] Fig. 1: Dimensions V01.00 | 2022/09 | 8 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 9: Block Diagram
The four outputs of the device are protected by internal electronic fuses (eFuse). V01.00 | 2022/09 | 9 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 10: Functions And Operating Modes
If an external fuse is used, use type B or C circuit breakers of at least 6 A to prevent un- wanted tripping of the circuit breaker. V01.00 | 2022/09 | 10 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 11: Dc Voltage Outputs
The outputs of the device are switched on in the delivery state. The outputs are not switched off in a safety-related manner. V01.00 | 2022/09 | 11 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... - Page 12 Output load Hold-up time Typ. 56 ms 250 W Min. 47 ms Typ. 24 ms 500 W Min. 20 ms V01.00 | 2022/09 | 12 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
-
Page 13: Io-Link Interface
Link during commissioning for example, are stored in the EEPROM of the device and are avail- able even if the IO-Link communication fails. V01.00 | 2022/09 | 13 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 14: Installing
TN, TT, IT delta mains systems or IT star mains systems without insulation monitoring: Use in zones of overvoltage category II up to 2000 m (6560 ft) V01.00 | 2022/09 | 14 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 15: Connecting
2 = n.c. 3 = GND 4 = C/Q (IO-Link) 5 = n.c. Fig. 12: Pin assignment - IO-Link interface (X0) V01.00 | 2022/09 | 15 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 16: Commissioning
Commissioning Commissioning After connecting the wires and by switching on the AC input voltage, the device automatically goes into operation. V01.00 | 2022/09 | 16 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 17: Setting
All LEDs flash for 5 s to indicate that the key lock status has changed. The display returns to normal operation. V01.00 | 2022/09 | 17 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 18: Setting The Device Via Io-Link
Firmware revision of the device, (23) e. g. V1.0.7.0 0x18 Application Specific Tag Default "***" (24) Field for customer or application specific data V01.00 | 2022/09 | 18 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 19: Index 0X02: System Commands (According To Io-Link Specification)
Data storage lock 0: not activated (default) 1: activated Local parameterization lock Not implemented Local user interface lock Not implemented V01.00 | 2022/09 | 19 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 20: Parameters
Default values are shown in bold. Value Meaning PSU normal operation False True PSU standby Power supply in standby mode, all outputs are switched off V01.00 | 2022/09 | 20 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... - Page 21 Default values are shown in bold. Unit: V/bit Value range: 6144…7168 = 24…28 V Default value: 6272 = 24.5 V V01.00 | 2022/09 | 21 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
- Page 22 Bit order 15…8 7…0 15…8 7…0 15…8 7…0 15…8 7…0 Trip value Channel 1 Channel 2 Channel 3 Channel 4 V01.00 | 2022/09 | 22 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
- Page 23 15…8 7…0 Sub index Bit order 7…0 7…0 7…0 7…0 Trip value Channel 1 Channel 2 Channel 3 Channel 4 V01.00 | 2022/09 | 23 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
-
Page 24: Operating
The device has switched off due to overtemperature. As soon as the tem- perature reaches the normal operating range, the output switches on again and the STATUS LED lights up permanently green. V01.00 | 2022/09 | 24 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... - Page 25 The deviations of the internal output current sensors exceed the per- missible limits. Temperature sensor measurement out of range (-40 °C or +150 °C for more than 5 s). V01.00 | 2022/09 | 25 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
-
Page 26: Process Data (Cyclic Io-Link Data)
— 1: tripped, short-circuit at output short-circuit state eFuse ch3 — short-circuit state eFuse ch4 — short-circuit state V01.00 | 2022/09 | 26 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 27: Diagnostic And Status Messages (Acyclic Io-Link Data)
0: < 5 % 1: > 5 % 2: > 25 % 3: > 50 % 4: > 75 % V01.00 | 2022/09 | 27 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... - Page 28 15…12 3: Temperature trip 4: Power budget trip 5: Installation failure trip 6: Sensor fault trip 7: Fatal fault trip V01.00 | 2022/09 | 28 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
- Page 29 Ch1 eFuse number of 47…32 overcurrents Ch2 eFuse number of 31…16 overcurrents Ch3 eFuse number of 15… 0 overcurrents Ch4 V01.00 | 2022/09 | 29 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
- Page 30 The eFuse for the channel has tripped due to overcur- rent. 0x1841 eFuse tripped ch 2 Warning 0x1842 eFuse tripped ch 3 Warning 0x1843 eFuse tripped ch 4 Warning V01.00 | 2022/09 | 30 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
-
Page 31: Io-Link Error Codes
0x8041 Inconsistent parameter set Parameters inconsistent, device plausibility check failed 0x8082 Application not ready Device not ready, access denied V01.00 | 2022/09 | 31 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 32: Maintenance
Observe our return acceptance conditions when returning the device to Turck. 11.1 Returning devices Returns to Turck can only be accepted if the device has been equipped with a Decontamination declaration enclosed. The decontamination declaration can be downloaded from https://www.turck.de/en/retoure-service-6079.php and must be completely filled in, and affixed securely and weather-proof to the outside of the packaging. -
Page 33: Technical Data
Typ. 0.95, at 500 W 3 AC, 480 V AC Input Range /VAC Fig. 13: Voltage range – input voltage AC V01.00 | 2022/09 | 33 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... - Page 34 0.90 0.85 3 × 480 Vac 0.80 0.75 0.70 Fig. 16: Power factor vs. output power (at 24 VDC output voltage) V01.00 | 2022/09 | 34 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
-
Page 35: Dc Output
Trip Delay/s 2 3 4 5 6 12 [A] (typ.) Fig. 17: Trip curve diagram (max. 12 A) V01.00 | 2022/09 | 35 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... - Page 36 Fig. 18: Derating – output power vs. ambient temperature *Atmospheric pressure T <55°C T <45°C 2000 5000 Altidue (m) AP* (kPa) Fig. 19: Derating – output power vs. altitude V01.00 | 2022/09 | 36 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
-
Page 37: Efficiency And Power Losses
M12 male connector, 5-pole, A-coded IO-Link version V1.1 Baud rate COM3 (230.4 kBaud) Cycle Time SIO Mode Supported Process data length 23 byte V01.00 | 2022/09 | 37 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 38: General Technical Data
S. fig.: Output power vs. ambient temperature [} 35] Altitude Max. 5000 m (16 400 ft) S. fig.: Output power vs. altitude [} 35] V01.00 | 2022/09 | 38 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... - Page 39 The output shuts down and auto- matically attempts to restart. Protection class According to IEC 61140, PE connection required V01.00 | 2022/09 | 39 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
- Page 40 350 W at max. 60 °C - 25 + 45 + 55 + 70 T/°C Fig. 22: Derating – standard mounting orientation V01.00 | 2022/09 | 40 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
-
Page 41: Turck Subsidiaries - Contact Information
Turck Banner Malaysia Sdn Bhd Unit A-23A-08, Tower A, Pinnacle Petaling Jaya, Jalan Utara C, 46200 Petaling Jaya Selangor www.turckbanner.my V01.00 | 2022/09 | 41 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... - Page 42 Árpád fejedelem útja 26-28., Óbuda Gate, 2. em., H-1023 Budapest www.turck.hu Turck Inc. 3000 Campus Drive, USA-MN 55441 Minneapolis www.turck.us V01.00 | 2022/09 | 42 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
- Page 43 Over 30 subsidiaries and 60 representations worldwide! 100032475 | 2022/09 100032475 www.turck.com...
Need help?
Do you have a question about the PSU67-3P-1S-2L-24250-IOL-F and is the answer not in the manual?
Questions and answers