Radio, Am/Fm Stereo Cassette - Komatsu 730E Operation & Maintenance Manual

OM7001
Cab Radio
SETTING THE TIME
1. Turn the key switch "ON".
2. Press and hold DSPL/TM SET (9) for 2 sec-
onds. When the number display flashes, time
set mode is active.
3. Press TUNE / SEEK (7 & 8) to change the hour
setting.
4. Press the DSPL/TM button to switch to minutes.
The minute digits will flash when in this mode.
5. Press TUNE / SEEK to change the minute set-
ting.
After 5 seconds of inactivity has elapsed, the display
will return to the default mode. The clock will now
display the correct time of day.
RADIO, AM / FM STEREO CASSETTE
FIGURE 7-1. CAB RADIO
Optional Equipment - Section 7
GENERAL RECEIVER FUNCTIONS
The receiver is equipped with two FM radio bands,
FM1 and FM2. The two bands are identical, however,
each one allows the operator to set 6 preset
channels for a total of 12 FM presets overall.
TURNING THE POWER "ON" AND "OFF"
1. Turn the key switch to "ON".
2. Press PWR (1) to turn the receiver "ON" and
"OFF". Pushing ON/AUDIO (6) may also be
used to turn the receiver power "ON".
DISPLAY
With the receiver "OFF", the clock will be displayed.
Momentarily pressing DSP/TM SET (9) with the
receiver "ON" will allow the operator to toggle
between displays.
• When the receiver is in AM, FM1, FM2, or WX,
the display will toggle between the frequency and
the clock.
Page 7-1