Air Spring Service - Manitou R7 EXPERT Service Manual

AIR SPRING SERVICE

Using Manitou 24mm Flat Ground
1
Socket, rotate air spring top cap
counter-clockwise and remove
when threads completely disengage
from the stanchion.
Do not begin disassembly until
completely depressurizing air
spring.
Make sure to apply top down
force on tool to prevent slipping
Invert the fork. Using a 22mm
2
wrench, rotate the air spring
end cap counter-clockwise until
threads completely disengage from
stanchion.
Remove air spring assembly. Clean
3
assembly with isopropyl alcohol
and a lint-free towel. Inspect air
spring shaft, bumpers, and air
piston seal for wear/damage and
replace if necessary.
CAUTION
NOTICE
R7 EXPERT / PRO SERVICE GUIDE
9