Manitou R7 EXPERT Service Manual page 18

CASTING INSTALL
Install rebound knob. Holding
7
the knob steady, use a 2mm hex
wrench to assemble the rebound
knob screw (rotating clockwise) and
torque to 0.5-0.7 in lb [4-6 N m].
Using the Manitou 8mm Thin Wall
8
Socket and torque wrench, turn
the compression rod counter-
clockwise. Torque to
30-40 in lbs [3,4-4,5 N m].
Do not overtighten, as doing so can
damage the end of the rods.
18
R7 EXPERT / PRO SERVICE GUIDE