10. Install the brakes and adjust per the manufacturer’s instructions. 4. Do not use the SIX fork if any parts are broken, bent, cracked, or you sus- 11. For all SIX forks, adjust the front wheel quick release to clear the 0.334"...
(Figure 2). A 20 mm socket will be neces- few times. Continue injecting grease and push the fork up and down sary with the SIX. Remember: The springs are housed only in the left until stiction is eliminated.
Page 5
SERVICE SCHEDULE – Suggested Service for Manitou Forks NORMAL CONDITIONS – Short/Infrequent Rides • Lube fork as needed with Prep M lubricant via Microlube ports. • Disassemble, clean and lubricate fork every 4-5 months. • Lubricate spring stack as needed.