Page 2
Rio Grande assistance. Your table is designed for use indoors in a climate controled environment only. Damage can occur if the table is exposed to water, dampness, high humidity, freezing temperatures, etc. Professional assembly is strongly recommended. This assembly manual is intended to guide an experienced slate pool table installer with the assembly process of this for which the process is the same regardless of the cabinet type.
PARTS LIST IMAGE DESCRIPTION SPECIFICATION UNIT TABLE LEG 1 1060*1135*305 ① ASSEMBLY POSITION FRAME TABLE LEG 2 1070*1150*305 ② ASSEMBLY POSITION FRAME LONGITUDINAL BEAM 2180*100*83 ③ ASSEMBLY POSITION FRAME SHORT BEAM 1067*100*118 ④ ASSEMBLY POSITION FRAME LONGITUDINAL 2064*80*40 CENTRE BEAM ⑤...
HARDWARE LIST IMAGE DESCRIPTION SPECIFICATION UNIT ALLEN BOLOT ø10*30 ASSEMBLY FOR TABLE LEG POSITION BOLT NUT ASSEMBLY FOR TABLE LEG POSITION ALLEN BOLOT ø12*25 ASSEMBLY FOR TABLE LEG POSITION HEX BOLT ø10*130 ASSEMBLY FOR WOODEN CONNECTOR AND CROSS BEAM POSITION FLAT WAHER M10*30*2 ASSEMBLY...
Page 5
2mm*2pcs RUBBER SHIM 3mm*2pcs TO ADJUST THE TABLE LEG WOODEN SCREW 6*60 ASSEMBLY FOR SLATE AND TABLE FRAME POSITION BARREL NUT ø8*30 ASSEMBLY FOR THE LONG AND SHORT RAIL POSITION DOUBLE HEAD BOLT ø8*80 ASSEMBLY FOR THE LONG AND SHORT RAIL POSITION SEMICIRCLE WASHER ASSEMBLY...
Page 10
Code # Attention: There are some code number(#--#) writing on both bottom ends of each short and long rails, please connect 2 rail ends together correspondingly with the same code # by sequence in order to avoid some big gap between each 2 ends.
Need help?
Do you have a question about the PTSTEWAG08-Stella and is the answer not in the manual?
Questions and answers