Programming Your Own Phone Number; Selecting Call Notification - Motorola Nextel iDEN i1000 User Manual

PROGRAMMING YOUR OWN PHONE
NUMBER
Your new Nextel phone may need to have your number entered. This is a
one-time activity that can be performed using the following instructions. Or,
you can wait for your first incoming call, when it is automatically entered.
If your Nextel phone has two phone lines, Þrst select the
line for the phone number that you want to program,
and then continue. For more information, see ÒSelecting
the Additional LineÓ on page 31.
1. To store your phone number in your Nextel phone (or the additional
line, if you have two lines), press
2. Press
3. Enter your phone number.
4. Press
5. Press
Note: To recall your phone number at any time, press
,

SELECTING CALL NOTIFICATION

Volume Levels
You can select the volume of the ringer for incoming calls. For Additional
Line users, be sure to select the phone line before setting the ringer volume
(See "Selecting the Additional Line" on page 31 .)
Setting the Ring Volume:
1. Press ,
Menu item for ringer volume selection.
The display shows your current ringer volume.
2. Press on the side of the phone to listen as you raise or lower the
volume.
Note: If you press
SilentÓ will appear on the phone display.
3. When you determine the desired level, press
18 i1000
N O T E
under "Ok".
under "Store".
under "Exit".
, 1 .
, 3 ,
0
DEF
to the lowest setting, the words ÒVolume
1
, ,
to quickly access the Programming
under "Exit".
USER GUIDE
.