4.5
Enter a pause
If your CD5 is connected to a switchboard, you may need to enter a pause in a
stored number. This gives the switchboard time to get an outside line. A pause
is normally stored after the switchboard access code (e.g. 9). You can also add
a pause when dialing a number manually.
1.
When storing or dialing a number, press and hold
shows
P.
You can then continue storing / dialling the phone number.
4.6
Edit an entry
B
1.
Press
. Display shows the first entry.
2. Scroll
or
u
d
Edit contact
and press OK.
3. Edit the name and press
4. Edit the number. Press
5. Press e to return to standby.
4.7
Delete an entry
B
1.
Press
. Display shows the first entry.
2. Scroll
u
or
d
3. Scroll
to
Delete contact
d
4. Display shows
5. Press e to return to standby.
4.8
Memory status
You can check how much memory you have in your contacts list.
B
1.
Press
. Display shows the first entry.
2. Press Options, scroll
3. The display shows the number of used and free entries in the contacts list.
4. Press e to return to standby.
4.9
Delete all entries
B
1.
Press
. Display shows the first entry.
2. Press Options, scroll
3. Display shows
4. Press e to return to standby.
Contacts
to the entry you want to edit and press Options. Scroll
OK
to confirm. Use
Save
to confirm. Use
to the entry you want to delete and press Options.
and press OK.
Are you
sure?. Press Yes.
Memory status
d
to
Delete all contacts
d
to
Are you
sure?. Press Yes.
0
until the display
Clear
to delete characters.
Clear
to delete digits.
and press OK.
and press OK.
to
d
21