Table of Contents
Advertisement
7-6 Administration Guide
The Operation Mode selection will reset a number of default values that pertain to that particular DSLAM.
If the changes are such that the defaults completely change the configuration, you will see an alert
message asking you to confirm the resetting of the defaults.
Operation Mode...
+-----------------------------------------------------------+
D+-----------------------------------------------------------+
| Reset to default settings for this DSLAM?
D|
P|
|
+-----------------------------------------------------------+
Data Circuit VPI (0-255):
Data Circuit VCI (0-65535):
PREVIOUS SCREEN
If you are using the HDLC (Copper Mountain) Operation Mode, you need only specify your data link
encapsulation method.
Operation Mode...
Data Link Encapsulation...
PREVIOUS SCREEN
Return/Enter goes to new screen.
Enter Information supplied to you by your telephone company.
Select Data Link Encapsulation and from the pop-up menu, choose Frame Relay (the default), PPP, or
RFC1483 (or possibly PPPoE).
SDSL Line Configuration
NO
SDSL Line Configuration
+--------------------------+
+--------------------------+
| Generic
YES
+--------------------------+
0
38
NEXT SCREEN
HDLC (Copper Mountain)
Frame Relay
NEXT SCREEN
|
|
|
|
|
Advertisement
Table of Contents
