Table of Contents
Advertisement
7-2 Administration Guide
A screen similar to the following Main Menu appears:
Return/Enter goes to Easy Setup -- minimal configuration.
If you do not see the Main Menu, verify that:
If you are using a serial connection, that your serial port speed is the same as the Netopia 4752's default
9600 baud, for first use.
The computer used to view the console screen has its serial port connected to the Netopia 4752's
Console port or an Ethernet connection to one of its Ethernet ports. See
Your Device" on page 6-3
Telnet or the terminal emulation software is configured for the recommended values.
If you are connecting via the Console port, your computer's serial port is not being used by another device,
such as an internal modem, or an application. Turn off all other programs (other than your terminal
emulation program) that may be interfering with your access to the port.
You have entered the correct password, if necessary. Your Netopia 4752's console access may be
password protected from a previous configuration. See your system administrator to obtain the password.
See
Appendix A, "Troubleshooting,"
Netopia 4752 v5.1
Easy Setup...
WAN Configuration...
System Configuration...
Voice Configuration...
Utilities & Diagnostics...
Statistics & Logs...
Quick Menus...
Quick View...
or
"Connecting through a Telnet Session" on page
for more suggestions.
"Connecting a Console Cable to
6-2.
Advertisement
Table of Contents
