Table of Contents
Advertisement
A number of utilities and tests are available for system diagnostic and control purposes.
This section covers the following topics:
"Ping" on page 15-2
"Trace Route" on page 15-4
"Telnet Client" on page 15-5
"Disconnect Telnet Console Session" on page 15-6
"Factory Defaults" on page 15-6
"Transferring Configuration and Firmware Files with TFTP" on page 15-7
"Transferring Configuration and Firmware Files with XMODEM" on page 15-10
"Restarting the System" on page 15-12
Note: These utilities and tests are accessible only through the console-based management screens. See
Chapter 6, "Console-Based Management,"
screens.
You access the Utilities & Diagnostics screens from the Main Menu.
for information on accessing the console-based management
Utilities & Diagnostics
Ping...
Trace Route...
Telnet...
Disconnect Telnet Console Session...
Trivial File Transfer Protocol (TFTP)...
X-Modem File Transfer...
Restart System...
Utilities and Diagnostics 15-1
Revert to Factory Defaults...
Advertisement
Table of Contents
