Table of Contents
Advertisement
Operation Mode...
Clock Source...
Data Rate Mode...
Data Rate...
Display/Change Circuit...
Add Circuit...
Delete Circuit...
Data Link Encapsulation...
PPP Mode...
Select Operation Mode and from the pop-up menu choose the type of DSLAM to which you will be
connecting.
Each access concentrator (DSLAM) has a different set of default data rates and other parameters.
Your service provider should supply you with the appropriate information about the type and capabilities of
the access concentrator equipment they use.
The Operation Mode selection will reset a number of default values that pertain to that particular DSLAM.
If the changes are such that the defaults completely change the configuration, you will see an alert
message asking you to confirm the resetting of the defaults.
Operation Mode...
+-----------------------------------------------------------+
C+-----------------------------------------------------------+
| Reset to default settings for this DSLAM?
D|
|
D|
A+-----------------------------------------------------------+
Delete Circuit...
Data Link Encapsulation...
PPP Mode...
SDSL Line Configuration
SDSL Line Configuration
NO
WAN and System Configuration 9-3
+------------------------+
+------------------------+
| Generic
| Lucent
| Nokia EOC Fast
| Nokia Fixed
| Paradyne
| Nortel UE IMAS
| HDLC (Copper Mountain) |
+------------------------+
PPP
VC Multiplexed
+--------------------------+
+--------------------------+
| Generic
YES
+--------------------------+
PPP
VC Multiplexed
|
|
|
|
|
|
|
|
|
|
|
Advertisement
Table of Contents
