Ip Parameters (Wan Default Profile) - Netopia 4753 2A4NA Administration Manual

IP Parameters (WAN Default Profile)
The Netopia 4753 in HDLC (Copper Mountain) Operation Mode supports a WAN default profile that permits
several parameters to be configured without an explicitly configured Connection Profile.
The procedure is similar to the procedure to bind map lists and server lists to a Connection Profile.
From the Main Menu go to the WAN Configuration screen, then the Default Profile screen. Select IP Parameters
and press Return.
Main
Menu
The IP Parameters (Default Profile) screen appears.
Address Translation Enabled:
NAT Map List...
NAT Server List...
Filter Set (Firewall)...
Remove Filter Set
Receive RIP:
Return/Enter to select <among/between> ...
Toggle Address Translation Enabled to Yes.
WAN
Configuration
IP Parameters (Default Profile)
Multiple Network Address Translation 11-25
WAN Default
Profile
Yes
Easy-PAT List
Easy-Servers
Both
IP Parameters
(Default Profile)