Table of Contents
Advertisement
The System Configuration menu screen appears:
Use this screen if you want options beyond Easy Setup.
Network protocols setup
These screens allow you to configure your network's use of the standard networking protocols:
IP: Details are given in
Filter sets
These screens allow you to configure security on your network by means of filter sets and a basic firewall.
Details are given in
IP address serving
These screens allow you to configure IP address serving on your network by means of DHCP, WANIP, and BootP.
Details are given in
Date and time (Network Time Protocol)
You can set the system's date and time in the Set Date and Time screen.
Select Date and Time in the System Configuration screen and press Return. The Set Date and Time screen
appears.
System Configuration
IP Setup...
Filter Sets...
IP Address Serving...
Date and Time...
Console Configuration...
SNMP (Simple Network Management Protocol)...
Security...
Upgrade Feature Set...
Logging...
"IP Setup" on page
"Security" on page
13-1.
"IP Address Serving" on page
10-2.
10-10.
WAN and System Configuration 9-17
Advertisement
Table of Contents
