Replacing The Air Filter - Fayat Group DYNAPAC DFP7AX Operating Instruction

1
Fig. 87
1
Fig. 88

8.8.7 Replacing the air filter

Protective equipment:
1. Park the machine on level ground.
2. Park the machine safely
in secured condition" on page 64.
3. Tilt the machine slightly towards the oil drain side and secure
it properly.
4. Unscrew the oil drain plug (1) and collect running out oil.
B-834-0041
5. Stand the machine upright.
NOTICE!
Components may get damaged!
Do not use low-ash engine oils for the exciter shaft
housing.
6. Fill in fresh oil up to the bottom edge of the opening.
B-834-0031
7. Screw in the plug (1).
8. Dispose of oil in line with environmental regulations.
NOTICE!
Danger of engine damage!
–
Protective equipment:
1. Park the machine safely
in secured condition" on page 64.
2. Allow the engine to cool down.
DFP7AX
Maintenance – Annually
n Working clothes
n Safety shoes
n Protective gloves
Ä Chapter 6.5 „Parking the machine
Do not start the engine after having removed
the air filter.
n Working clothes
n Safety shoes
Protective gloves
n
Ä Chapter 6.5 „Parking the machine
93