Troubleshooting - Vacmaster EasyClean SCA0801 Manual

WARNING: To reduce the risk of electric shock, unplug before troubleshooting.
PROBLEM
Unplugged at power outlet.
Defective power outlet.
The cleaner is not
operational.
The motor is damaged.
Dirty water tank is not installed
correctly.
Poor pick-up
Dirty water tank is full.
performance.
The suction hose is clogged.
Float value is activated.
Dirty water tank is full.
Dirty water tank is not installed
correctly.
Water escapes
from the cleaner.
Clean water tank is not installed
correctly.
Clean water tank is empty.
Clean water tank is not installed
correctly.
No solution
spraying out.
The cleaner is overheated.

TROUBLESHOOTING

POSSIBLE CAUSE
Plug in firmly to suitable power outlet.
Check with a good appliance. Be sure
the power cord plug is fully plugged
into an electrical outlet.
Have the damaged part checked by
qualified personnel or contact the
after sales helpline.
Check the dirty water tank for correct
installation. Ensure it is installed in
place.
Empty the dirty water tank.
Clean the hose.
Empty the dirty water tank.
Empty the dirty water tank.
Check the dirty water tank for correct
installation. Ensure it is installed in
place.
Check the clean water tank for correct
installation. Ensure it is installed in
place.
Fill the clean water tank.
Check the clean water tank for correct
installation. Ensure it is installed in
place.
Unplug the power cord and let the
cleaner cool down for 30 minutes.
Restart the cleaner. If the problem
persists, contact the after sales
helpline.
11
SOLUTION
GB